Flexosomes as a promising nanoplatform for enhancing tolnaftate ocular delivery: Formulation, in vitro characterization, statistical optimization, ex vivo and microbial in vivo studies.

The eye is a complex organ with a unique physiology and anatomy. Using novel nanosystems is expected to enhance ocular drug permeation and retention. Hence, this work aimed to study the potential of flexosomes as an ocular delivery system to enhance the corneal permeation and antifungal activity of Tolnaftate (TOL). Different flexosomes formulae were formulated using ethanol injection method, employing a 31.22 full factorial design. The studied formulation variables were: X1: amount of stearyl amine, X2: hydration volume and X3: type of edge activator. Encapsulation efficiency, particle size and zeta potential were selected as dependent variables. FX5 was selected as the optimal TOL flexosomes and showed encapsulation efficiency of 66.08 ± 11.38%, particle size of 154.99 ± 29.11 nm and zeta potential of 42.95 ± 0.64 mV. FX5 was subjected to further ex vivo and in vivo studies which showed that TOL flux was significantly increased through FX5 compared to TOL suspension. Draize test and histopatholoigal tests assured that FX5 is safe to be used for eye.. The in vivo fungal susceptibility testing using Aspergillus niger demonstrated the superior and more durable antifungal activity of FX5 than TOL suspension. Hence, FX5 can be considered as promising nanocarrier for safe and efficient ocular TOL delivery.

Enhanced Ocular Anti-Aspergillus Activity of Tolnaftate Employing Novel Cosolvent-Modified Spanlastics: Formulation, Statistical Optimization, Kill Kinetics, Ex Vivo Trans-Corneal Permeation, In Vivo Histopathological and Susceptibility Study.

Tolnaftate (TOL) is a thiocarbamate fungicidal drug used topically in the form of creams and ointments. No ocular formulations of TOL are available for fungal keratitis (FK) treatment due to its poor water solubility and unique ocular barriers. Therefore, this study aimed at developing novel modified spanlastics by modulating spanlastics composition using different glycols for enhancing TOL ocular delivery. To achieve this goal, TOL basic spanlastics were prepared by ethanol injection method using a full 32 factorial design. By applying the desirability function, the optimal formula (BS6) was selected and used as a nucleus for preparing and optimizing TOL-cosolvent spanlastics according to the full 31.21 factorial design. The optimal formula (MS6) was prepared using 30% propylene glycol and showed entrapment efficiency percent (EE%) of 66.10 ± 0.57%, particle size (PS) of 231.20 ± 0.141 nm, and zeta potential (ZP) of -32.15 ± 0.07 mV. MS6 was compared to BS6 and both nanovesicles significantly increased the corneal permeation potential of TOL than drug suspension. Additionally, in vivo histopathological experiment was accomplished and confirmed the tolerability of MS6 for ocular use. The fungal susceptibility testing using Aspergillus niger confirmed that MS6 displayed more durable growth inhibition than drug suspension. Therefore, MS6 can be a promising option for enhanced TOL ocular delivery.

Implementing polymeric pseudorotaxanes for boosting corneal permeability and antiaspergillus activity of tolnaftate: formulation development, statistical optimization, ex vivo permeation and in vivo assessment.

Fungal keratitis (FK) is a devastating ocular disease that can cause corneal opacity and blindness if not treated effectively. Tolnaftate (TOL) is a selective fungicidal drug against Aspergillus spp. which are among the most common causes of mycotic keratitis. TOL is lipophilic drug with low water solubility and permeation which act as obstacles for its clinical ocular efficacy. Hence, this study aimed to statistically optimize a novel polymeric pseudorotaxanes (PSRs) containing TOL for enhancing its ocular permeability and antifungal effect. For achieving this goal, a full 31.22 factorial design was fashioned for preparing and optimizing TOL-PSRs using film hydration technique. Three formulation variables were studied: drug amount (X1), weight ratio of Pluronics to HPßCD (X2) and Pluronic system (X3). Entrapment efficiency percent (EE%) (Y1), particle size (PS) (Y2) and zeta potential (ZP) (Y3) were set as dependent variables. The selected optimal TOL-PSRs (PSR1) showed EE% of 71.55 ± 2.90%, PS of 237.05 ± 12.80 nm and ZP of -32.65 ± 0.92 mV. In addition, PSR1 was compared to conventional polymeric mixed micelles (PMMs) and both carriers significantly increased the drug flux and resulted in higher amount permeated per unit area in 8 h compared to drug suspension. The histopathological studies assured the safety of PSR1 for ocular use. The in vivo susceptibility testing using Aspergillus niger confirmed that PSR1 displayed sustained antifungal activity up to 24 h. The obtained results revealed the admirable potential of PSR1 to be used as novel nanocarriers for promoting TOL ocular delivery.

Enhanced Transdermal Delivery of Bisoprolol Hemifumarate via Combined Effect of Iontophoresis and Chemical Enhancers: Ex Vivo Permeation/In Vivo Pharmacokinetic Studies.

Bisoprolol hemifumarate (BH) is an antihypertensive drug that is used as first-line treatment for chronic hypertension and angina pectoris. Our study was performed to enhance the transdermal delivery of BH, a hydrophilic drug active with high molecular weight, through differently prepared hydrogels. The synergistic effect of permeation enhancers and iontophoresis was investigated via both ex vivo and in vivo permeation studies. Ex vivo iontophoretic permeation studies were performed by using male albino Wistar rat skin. Cellosolve® hydrogel (F7) showed a 1.5-fold increase in Q180, Jss, and FER compared to F5 (lacking permeation enhancer). BH pharmacokinetic data were studied in human volunteers, following transdermal delivery of F7, using Phoresor® Unit II iontophoresis device, compared to conventional oral tablets. F7 showed 1.9- and 2-fold higher values of Cmax and AUC0-40, respectively compared to Concor® tablets, as well as a smaller Tmax (2.00 ± 2.00 h). The relative bioavailability of F7 was found to be 201.44%, relative to Concor® tablets, demonstrating the significantly enhanced transdermal permeation of BH from the selected hydrogel by iontophoresis, in human volunteers. Finally, results showed the successful utility of permeation enhancers combined with iontophoresis in significantly enhanced transdermal permeation of BH, despite its large molecular weight and hydrophilic nature. Therefore, this strategy could be employed as a successful alternative route of administration to conventional oral tablets.

Statistical optimization of hyaluronic acid enriched ultradeformable elastosomes for ocular delivery of voriconazole via Box-Behnken design: in vitro characterization and in vivo evaluation.

Voriconazole (VCZ) is a well-known broad spectrum triazole antifungal, mainly used orally and intravenously. The study aimed to formulate VCZ into ultradeformable elastosomes for the topical treatment of ocular fungal keratitis. Different formulae were prepared using a modified ethanol injection method, employing a 33 Box-Behnken design. They were characterized by measuring their entrapment efficiency (EE%), particle size (PS), polydispersity index (PDI) and zeta potential (ZP). The optimized formula was subjected to further in vitro investigations and in vivo evaluation studies. The prepared vesicles had satisfactory EE%, PS, PDI and ZP values. The numerical optimization process suggested an optimal elastosomal formula (OE) composed of phosphatidyl choline and brij S100 at the weight ratio of 3.62: 1, 0.25%w/v hyaluronic acid and 5% (percentage from phosphatidyl choline/brij mixture) polyvinyl alcohol. It had high EE (72.6%), acceptable PS and PDI (362.4 nm and 0.25, respectively) and highly negative ZP of -41.7 mV. OE exhibited higher elasticity than conventional liposomes, with acceptable stability for three months. Transmission electron microscopy demonstrated the spherical morphology of vesicles with an external transparent coat of Hyaluronic acid. OE was expected to cause no ocular irritation or blurring in vision as reflected by pH and refractive index measurements. The histopathological study revealed the safety of OE for ocular use. The fungal susceptibility testing using Candida albicans demonstrated the superiority of OE to VCZ suspension, with greater and more durable growth inhibition. Therefore, OE can be regarded as a promising formula, achieving both safety and efficacy.

Voriconazole Ternary Micellar Systems for the Treatment of Ocular Mycosis: Statistical Optimization and In Vivo Evaluation.

Voriconazole (VRC) is a broad spectrum, second generation triazole antifungal. The main use of VRC is via the oral and intravenous route. The study aimed to formulate VRC into ternary micellar systems (TMSs) for the topical treatment of ocular mycosis. TMSs were successfully prepared by water addition/solvent evaporation method, applying a 3-factor D-optimal design. The numerical optimization process suggested an optimal formula (OTMS) composed of total Pluronics to drug weight ratio of 22.89: 1, 1:1 weight ratio of Pluronic® P123 and F68, and 2% w/v of Labrasol. OTMS had high solubilization efficiency of 98.0%, small micellar size of 21.8 nm and suitable zeta potential and polydispersity index values of -9.0 mV and 0.261, respectively. OTMS exhibited acceptable stability for 3 months. Transmission electron microscopy demonstrated the spherical morphology of micelles. OTMS was expected to cause no ocular irritation or blurring in vision as reflected by pH and refractive index measurements. The histopathological study revealed the safety of OTMS for ocular use. The fungal susceptibility testing using Candida albicans demonstrated the superiority of OTMS to VRC suspension, with greater and more durable growth inhibition. Therefore, ocular application of optimized VRC-loaded TMSs can be a promising treatment for ocular mycosis.

Enhancement of Transdermal Delivery of Haloperidol via Spanlastic Dispersions: Entrapment Efficiency vs. Particle Size.

Haloperidol (Hal) is a well-known typical antipsychotic. Hepatic first pass metabolism leads to its limited oral bioavailability. This study aimed at enhancing transdermal delivery of Hal via spanlastic formulae. Hal-loaded spanlastics of Span®60 and an edge activator (EA) were successfully prepared by ethanol injection method according to a 31.41 full factorial design. In this design, independent variables were X1, EA type, and X2, Span®60 to EA ratio. Y1, percentage entrapment efficiency (EE%); Y2, particle size (PS); Y3, deformability index (DI); and Y4, percentage drug released after 4h (Q4h), were chosen as dependent variables. The Fourier-transform infrared spectral analysis showed no considerable chemical interaction between Hal and the used excipients. Both factors affected significantly all the responses except DI. Desirability of each prepared formula was calculated based on maximizing EE% and Q4h and minimizing PS. Formula F6, with X1, Tween®80, and X2, 8:2, had the highest desirability value followed by F7, with X1, Tween®80, and X2, 6:4, and both were chosen as selected formulae (SF) for further investigation. F6 (having more entrapped Hal), F7 (of smaller PS), and Hal solution in propylene glycol were subjected to ex vivo permeation test through newborn rat skin. Both formulae showed marked enhancement in drug permeation compared with drug solution. The significantly higher Q36h and J36h of F7 from F6 may indicate that the smaller particle size aided more than higher entrapment in achieving a higher permeation for Hal of 3.5±0.2µg/cm2.h. These results are promising for further investigation of this formula.

Penetration enhancer-containing spanlastics (PECSs) for transdermal delivery of haloperidol: in vitro characterization, ex vivo permeation and in vivo biodistribution studies.

Haloperidol (Hal) is one of the widely used antipsychotic drugs. When orally administered, it suffers from low bioavailability due to hepatic first pass metabolism. This study aimed at developing Hal-loaded penetration enhancer-containing spanlastics (PECSs) to increase transdermal permeation of Hal with sustained release. PECSs were successfully prepared using ethanol injection method showing reasonable values of percentage entrapment efficiency, particle size, polydispersity index and zeta potential. The statistical analysis of the ex vivo permeation parameters led to the choice of F1L - made of Span® 60 and Tween® 80 at the weight ratio of 4:1 along with 1% w/v Labrasol® - as the selected formula (SF). SF was formulated into a hydrogel by using 2.5% w/v of HPMC K4M. The hydrogel exhibited good in vitro characteristics. Also, it retained its physical and chemical stability for one month in the refrigerator. The radiolabeling of SF showed a maximum yield by mixing of 100 µl of diluted formula with 50 µl saline having 200 MBq of 99mTc and containing 13.6 mg of reducing agent (NaBH4) and volume completed to 300 µl by saline at pH 10 for 10 min as reaction time. The biodistribution study showed that the transdermal 99mTc-SF hydrogel exhibited a more sustained release pattern and longer circulation duration with pulsatile behavior in the blood and higher brain levels than the oral 99mTc-SF dispersion. So, transdermal hydrogel of SF may be considered a promising sustained release formula for Hal maintenance therapy with reduced dose size and less frequent administration than oral formula.

Duodenum-triggered delivery of pravastatin sodium: II. Design, appraisal and pharmacokinetic assessments of enteric surface-decorated nanocubosomal dispersions.

CONTEXT: Pravastatin sodium (PVS) is a freely water-soluble HMG-CoA inhibitor that suffers from instability at gastric pH, extensive first pass metabolism, short elimination half-life (1-3 h) and low oral bioavailability (18%). OBJECTIVE: To overpower these drawbacks and to maximize drug absorption at its main site of absorption at the duodenum, enteric surface-coated PVS-loaded nanocubosomal dispersions were presented. MATERIALS AND METHODS: Glyceryl monooleate (GMO)-based dispersions were developed by the fragmentation or the liquid precursor methods using Pluronic® F127 or Cremophor® EL as surfactants. As a challenging enteric-coating approach, the promising dispersions were surface-coated via lyophilization with Eudragit® L100-55; a duodenum-targeting polymer. The drug content, particle size, zeta potential, morphology and release studies of PVS-loaded dispersions were evaluated before and after surface-coating. Compared to an aqueous PVS solution, the pharmacokinetics of the best achieved system (E-F8) was evaluated (UPLC-MS/MS) in rats. RESULTS: The enteric surface-coated nanocubosomal dispersions were more or less spherical in shape and showed high drug-loading, negative zeta potential values and fine-tuned biphasic drug-release patterns characterized by retarded (2 h) and sustained (10 h) phases in pH 1.2 and pH 6.8, respectively. E-F8 system showed significantly (p< 0.05) higher oral bioavailability, delayed Tmax and prolonged MRT0-∞ following oral administration in rats. CONCLUSIONS: The duodenum-triggering potential and the controlled-release characteristics of the best achieved system for smart PVS delivery were revealed.

Novel instantly-soluble transmucosal matrix (ISTM) using dual mechanism solubilizer for sublingual and nasal delivery of dapoxetine hydrochloride: In-vitro/in-vivo evaluation.

Dapoxetine (D) suffers from poor oral bioavailability (42%) due to extensive first pass metabolism. The usefulness of transmucosal (sublingual and intranasal) drug delivery to improve bioavailability of D, a weak basic drug, has been hampered by its poor solubility in the neutral pH of the body fluids. In this study, instantly-soluble transmucosal matrices (ISTMs) of D, containing dual mechanism solubilizer (Pluronic F-127/citric acid mixture), were prepared by lyophilization technique to enhance matrix disintegration, dissolution and transmucosal permeation. The matrices were evaluated for in-vitro disintegration, wetting time, in-vitro dissolution, ex vivo transmucosal permeation, scanning electron microscopy and in-vivo studies. Dissolution studies confirmed the higher ability of ISTMs to enhance the early time point dissolution and maintain complete drug dissolution in pH 6.8 compared to conventional lyophilized matrices. The optimized ISTM gave approximately 77.54 and 88.40 folds increase of D dissolution after 1 and 3min relative to the drug powder in pH 6.8. ISTMs containing the highest F127 concentration (2%) and the lowest gelatin and mannitol concentrations (1%) exhibited the shortest in-vitro disintegration times (<10s), the fastest dissolution in the neutral pH of body fluids (∼99% in 3min) and the highest enhancement of transmucosal permeation. The relative bioavailabilities of D after sublingual and intranasal administration of ISTMs to rabbits were about 124.58% and 611.15%, respectively, in comparison to the oral market tablet. The significant increase of drug dissolution in nasal fluids, rapid permeation rate together with the improved bioavailability propose that ISTMs could be promising for intranasal delivery of drugs suffering from oral hepatic metabolism and have limited solubility in nasal fluids.

Duodenum-triggered delivery of pravastatin sodium via enteric surface-coated nanovesicular spanlastic dispersions: development, characterization and pharmacokinetic assessments.

Pravastatin sodium (PVS) is a hydrophilic HMG-CoA reductase inhibitor that is mainly absorbed from duodenum. PVS has a short elimination half-life (1-3 h), suffers from instability at gastric pH, extensive hepatic first-pass metabolism and low absolute bioavailability (18%). The current work aimed to develop enteric surface-coated spanlastic dispersions as controlled-release duodenum-triggered systems able to surmount PVS drawbacks. PVS-loaded spanlastic dispersions were prepared by ethanol-injection method using span(®) 60. Tween(®) 60 and Tween(®) 80 were explored as edge activators. As a novel approach, the fine spanlastic dispersions were surface-coated with an enteric-polymer (Eudragit(®) L100-55) via freeze-drying. The systems were evaluated, before and after enteric-coating, for particle size, zeta potential, PVS entrapment efficiency (EE%), morphology and PVS release studies. PVS pharmacokinetics from the best achieved system and an aqueous solution were estimated in rats by UPLC-MS/MS. The best achieved enteric surface-coated spanlastic dispersion (E-S6) displayed spherical nanosized vesicles (647.60 nm) possessing negative zeta potential (-6.93 mV), promising EE% (63.22%) and a biphasic drug-release pattern characterized by a retarded-release phase (0.1 N HCl, 2 h) and a controlled-release phase (pH 6.8, 10 h). The higher Cmax, delayed Tmax, prolonged MRT(0-∞), longer elimination t50% and enhanced oral bioavailability unravel E-S6 potential for oral PVS delivery.

Development and evaluation of fixed dose bi therapy sublingual tablets for treatment stress hypertension and anxiety.

OBJECTIVE: A stress induced rise in the blood pressure. Some believe that patients with hypertension are characterized by a generalized state of increased anxiety. AIM: The purpose of this study is to prepare a fixed dose bi therapy using bisoprolol hemifumarate (BH) as antihypertensive drug and buspirone hydrochloride (BuHCl) as anxiolytic drug, which can be used to treat both diseases concomitantly. Using sublingual tablets is hopeful to improve the BuHCl poor oral bioavailability and to facilitate administration to patients experiencing problems with swallowing. MATERIALS AND METHODS: A total of 5mg BH and 10mg BuHCl were selected based on compatibility study. A 3×22 full factorial design was adopted for the optimization of the tablets prepared by direct compression method. The effects of the filler type, the binder molecular weight, and the binder type were studied. The prepared formulae were evaluated according to their physical characters as hardness, friability, disintegration time (new modified method and in vivo disintegration time) and wetting properties. In vitro drugs dissolute, permeation through the buccal mucosa and the effect of storage were analyzed by a new valid high pressure liquid chromatography (HPLC) method. Bioavailability study of the selected formula study was carried out and followed by the clinical. RESULTS: The optimized tablet formulation showed accepted average weight, hardness, wetting time, friability, content uniformity, disintegration time (less than 3 min). Maximum drug release could be achieved with in 10 min. In addition enhancing drug permeation through the buccal mucosa and, the maximum concentration of the drug that reached the blood was in the first 10 min which means a rapid onset of action and improved the extent of both drug's absorption. CONCLUSION: The results revealed that sublingual (F6) tablets containing both drugs would maintain rapid onset of action, and increase bioavailability. BuHCl with BH can be attributed to the marked decline in DBP and SBP. That led to a reduction in the MAP.

Microemulsion and poloxamer microemulsion-based gel for sustained transdermal delivery of diclofenac epolamine using in-skin drug depot: in vitro/in vivo evaluation.

Microemulsion (ME) and poloxamer microemulsion-based gel (PMBG) were developed and optimized to enhance transport of diclofenac epolamine (DE) into the skin forming in-skin drug depot for sustained transdermal delivery of drug. D-optimal mixture experimental design was applied to optimize ME that contains maximum amount of oil, minimum globule size and optimum drug solubility. Three formulation variables; the oil phase X1 (Capryol(®)), Smix X2 (a mixture of Labrasol(®)/Transcutol(®), 1:2 w/w) and water X3 were included in the design. The systems were assessed for drug solubility, globule size and light absorbance. Following optimization, the values of formulation components (X1, X2, and X3) were 30%, 50% and 20%, respectively. The optimized ME and PMBG were assessed for pH, drug content, skin irritation, stability studies and ex vivo transport in rat skin. Contrary to PMBG and Flector(®) gel, the optimized ME showed the highest cumulative amount of DE permeated after 8h and the in vivo anti-inflammatory efficacy in rat paw edema was sustained to 12h after removal of ME applied to the skin confirming the formation of in-skin drug depot. Our results proposed that topical ME formulation, containing higher fraction of oil solubilized drug, could be promising for sustained transdermal delivery of drug.

Positively charged polymeric nanoparticle reservoirs of terbinafine hydrochloride: preclinical implications for controlled drug delivery in the aqueous humor of rabbits.

Frequent instillation of terbinafine hydrochloride (T HCl) eye drops (0.25%, w/v) is necessary to maintain effective aqueous humor concentrations for treatment of fungal keratitis. The current approach aimed at developing potential positively charged controlled-release polymeric nanoparticles (NPs) of T HCl. The estimation of the drug pharmacokinetics in the aqueous humor following ocular instillation of the best-achieved NPs in rabbits was another goal. Eighteen drug-loaded (0.50%, w/v) formulae were fabricated by the nanopreciptation method using Eudragit® RS100 and chitosan (0.25%, 0.5%, and 1%, w/v). Soybean lecithin (1%, w/v) and Pluronic® F68 (0.5%, 1%, and 1.5%, w/v) were incorporated in the alcoholic and aqueous phases, respectively. The NPs were evaluated for particle size, zeta potential, entrapment efficiency percentage (EE%), morphological examination, drug release in simulated tear fluid (pH 7.4), Fourier-transform IR (FT-IR), X-ray diffraction (XRD), physical stability (2 months, 4°C and 25°C), and drug pharmacokinetics in the rabbit aqueous humor relative to an oily drug solution. Spherical, discrete NPs were successfully developed with mean particle size and zeta potential ranging from 73.29 to 320.15 nm and +20.51 to +40.32 mV, respectively. Higher EE% were achieved with Eudragit® RS100-based NPs. The duration of drug release was extended to more than 8 h. FT-IR and XRD revealed compatibility between inactive formulation ingredients and T HCl and permanence of the latter's crystallinity, respectively. The NPs were physically stable, for at least 2 months, when refrigerated. F5-NP suspension significantly (P<0.05) increased drug mean residence time and improved its ocular bioavailability; 1.657-fold.

Promising ion-sensitive in situ ocular nanoemulsion gels of terbinafine hydrochloride: design, in vitro characterization and in vivo estimation of the ocular irritation and drug pharmacokinetics in the aqueous humor of rabbits.

Terbinafine hydrochloride (T-HCl) is recommended for the management of fungal keratitis. To maintain effective aqueous humor concentrations, frequent instillation of T-HCl drops is necessary. This work aimed to develop alternative controlled-release in situ ocular drug-loaded nanoemulsion (NE) gels. Twelve pseudoternary-phase diagrams were constructed using oils (isopropyl myristate/Miglyol 812), surfactants (Tween 80/Cremophor EL), a co-surfactant (polyethylene glycol 400) and water. Eight drug-loaded (0.5%, w/v) NEs were evaluated for thermodynamic stability, morphology, droplet size and drug release in simulated tear fluid (pH 7.4). Following dispersion in gellan gum solution (0.2%, w/w), the in situ NE gels were characterized for transparency, rheological behavior, mucoadhesive force, drug release and histopathological assessment of ocular irritation. Drug pharmacokinetics of sterilized F31 [Miglyol 812, Cremophor EL: polyethylene glycol 400 (1:2) and water (5, 55 and 40%, w/w, respectively)] in situ NE gel and oily drug solution were evaluated in rabbit aqueous humor. The NEs were thermodynamically stable and have spherical droplets (<30 nm). The gels were transparent, pseudoplastic, mucoadhesive and showed more retarded zero-order drug release rates. F31 in situ NE gel showed the least ocular irritation potential and significantly (P<0.01) higher C(max), delayed T(max), prolonged mean residence time and increased bioavailability.

Formulation of ketotifen fumarate fast-melt granulation sublingual tablet.

The purpose of this study was to prepare sublingual tablets, containing the antiasthmatic drug ketotifen fumarate which suffers an extensive first-pass effect, using the fast-melt granulation technique. The powder mixtures containing the drug were agglomerated using a blend of polyethylene glycol 400 and 6000 as meltable hydrophilic binders. Granular mannitol or granular mannitol/sucrose mixture were used as fillers. A mechanical mixer was used to prepare the granules at 40 degrees C. The method involved no water or organic solvents, which are used in conventional granulation, and hence no drying step was included, which saved time. Twelve formulations were prepared and characterized using official and non official tests. Three formulations showed the best results and were subjected to an ex vivo permeation study using excised chicken cheek pouches. The formulation F4I possessed the highest permeation coefficient due to the presence of the permeation enhancer (polyethylene glycol) in an amount which allowed maximum drug permeation, and was subjected to a pharmacokinetic study using rabbits as an animal model. The bioavailability of F4I was significantly higher than that of a commercially available dosage form (Zaditen solution-Novartis Pharma-Egypt) (p > 0.05). Thus, fast-melt granulation allowed for rapid tablet disintegration and an enhanced permeation of the drug through the sublingual mucosa, resulting in increased bioavailabililty.

Improvement of dissolution properties of Carbamazepine through application of the liquisolid tablet technique.

The aim of the work was to improve the dissolution properties of the practically insoluble antiepileptic drug, Carbamazepine (CBZ) by adopting the liquisolid compaction technique. Reported liquid load factors, and excipient ratios were used to calculate the required amounts of excipients necessary to prepare the compacts or tablets according to a mathematical model. Avicel PH 102, and Aerosil 200 were used as the carrier and the coating materials, respectively, and explotab was used as disintegrant to prepare four tablet formulae, out of which formula 1 was successfully compressed into tablets. The dissolution patterns of liquisolid CBZ tablets, carried out according to the USP, were comparable to those of Tegretol. The protection of male albino mice against the convulsion, induced by electroshock, was lower in case of liquisolid tablets compared to Tegretol suspension and tablets probably due to the precipitation of CBZ in the silica pores resulting from its high dose.